Products
Home > Products > Plain Weave Sintered Mesh

Plain Weave Sintered Square Woven Wire Mesh

Plain weave sintered square woven wire mesh is made by sintering multiple layers of plain weave square woven mesh together, and its cross section structure as below picture. Because of the large open area percentages of the square woven wire mesh layers, this type of sintered wire mesh has good permeability characteristics and low resistance to flow. It can be designed with any number and combination of square plain weave wire mesh layers to achieve particular flow and filtration characteristics. It is useful for polymer production, as well as a variety of fluid and air filtration applications.

Cross section structure of sintered mesh, plain square woven mesh as its reinforcement layer
PSM-1: Square plain woven sintered mesh cross section structure

Another possibility with this type of stainless steel sintered wire mesh is the ability to sinter a large number of layers of square woven wire mesh together to form parts that are very thick and useful as flame and detonation arrestors. These laminates can be inches thick and still be made with high flow characteristics.

Specification we can manufacture list here:

  • Filter Rating: 1 um - 200 um.
  • Materials: SUS304 (AISI304), SUS316 (AISI316), SUS316L (AISI316L).
  • Size: 300 × 1000 mm, 500 × 1000 mm, 600 × 1200 mm, 1000 × 1000 mm, 1200 × 1200 mm, 1000 × 1500 mm, 1200 × 1500 mm.

This type sinter mesh be cut and fabricated into various discs, tubes, filter cartridges, and flat panels.

Table of Plain Weave Sintered Mesh Technical Parameters
Model Structure Filter rating (u) Thickness (mm) Weight
(kg/ m2)
Porosity (%)
PS2-0.5T Filter layer + 60 2-100 0.5 1.6 60
PS3-0.7T 60 + Filter layer + 60 2-100 0.7 2.4 56
PS3-1.0T 50 + Filter layer + 20 20-200 1.0 3.3 58
PS3-2.0T Filter layer + 20 + 8.5 20-250 2.0 6.5 58
PS4-1.0T 60 + Filter layer + 40 + 20 2-200 1.0 4.4 44
PS4-1.7T 40 + Filter layer + 20 + 16 2-200 1.7 6.2 54
PS5-1.9T 30 + Filter layer + 60 + 20 + 16 2-200 1.9 5.3 52
PS5-2.5T 80 + Filter layer + 30 + 10 + 8.5 2-200 2.5 8.8 55
PS7-2.0T 50 + Filter layer + 40 + 20 + 40 + Filter layer + 50 2-150 2.0 7.4 58

Note: The porosity takes that of 20mesh as criteria, and other special structures can be manufactured.

Stainless steel plain weave sintered square woven wire mesh
PSM-2: Stainless steel plain weave sintered wire mesh
Plain weave sintered wire mesh filter panel
PSM-3: Plain weave sintered wire mesh filter panel
A piece of sintered square woven wire mesh
PSM-4: sintered square woven mesh piece
Sintered square hole wire mesh in black color
PSM-5: Black sintered square hole wire mesh

Inquiry for Our Product

Boegger Industech Limited
E-mail: info@sinteredfilter.org

When you contact us, please provide your detail requirements. That will help us give you a valid quotation.

Full Name *
Country Code * + Phone Number *
Message *